This feature when enable creates on the profile comment the same name as the selected filename. It can be useful for searching the profile, for example if the standard filename name was changed. This setting is located on the folders settings: During the file save process, the name that is placed on the save file …
Category archives: Features
Header options – VERSCHIEBUNG and ANDREHLAENGE
On Siemens machine, mostly using old Economos software, the header needs to have the following, or similar format: In this case the values represent: On the FastSeal creator software, those values can be obtained with the reserved words: Both can be parsed and used to make calculations. For the CYCL_MINZ is common to a small …
Continue reading “Header options – VERSCHIEBUNG and ANDREHLAENGE”
Inverted X option
On legacy machines, like the Economos IP4500/IP5000 series some of the movements need to be done on the X negative values due to the tools arrangement and the maximum diameter capability (IP4500 up to 450mm and IP5000 up to 500mm). For example the part off tools are generally installed on the lower portion of the …
O-Ring cross sections and standards
We collected the most important information regarding o-ring standards and those standards are added into the software. This will allow the end user to select those that are available in their organization. This way, the software will, when possible, present solutions to the user based on cross sections that are readily available on the client …
Reports
From version 5.3.4.0 (30 October 2021) reports where introduced. Reports can provide detailed information about almost all aspects of the software usage and make full advantage of the database stored information. The report window is located in the database section: Reports implemented: Export Once the results are obtained, they can be exported into a .PDF …
Windows 11
Windows 11 can be used with the FastSealCreator 5. During our in house tests no issues where registered, therefore the current status is fully supported.
Changing machining order
To change the machining order on the GCode tab is straightforward. Select and drag the operation to be moved into the desired order. Machining operation bars can also be minimized that might help seeing the overall machining process. It is not necessary to minimize the operations to change the machining order.
Groove Turn
GrooveTurn machining is now available, exclusively on the PISTON01 profile, located in the metal section. This machining methodology has many advantages over the standard machining, as one single tool can produce complex shapes. In the example video the outside of a piston is fully started and finished by the same tool. Part off is also …